A split air conditioner quote is the machine on the invoice, plus the installation lines the carton does not include. Installation usually covers mounting the two units and connecting the copper pipe that comes in that model’s kit. Extra pipe, the outdoor bracket, the drain, a plug, and any core cutting are separate lines on the technician’s bill. This page names those lines. The rupees are the ones on your quote and on that brand’s installation card the day you pay.
The running half of the bill
Installation is the day-one bill. Electricity over later summers is a separate bill. Use the AC power consumption calculator for the units and for whether a higher star rating earns back its price at your tariff. This page does not redo that sum.
The four buckets of an AC quote
A product page can show one machine price and one installation fee. The bill at the house still has four kinds of cost.
- Upfront: The machine on the tax invoice. Installation labour. Copper beyond the length named in that model’s kit list. The outdoor bracket or stand. Drain pipe. A plug or extra cable if the cord is not ready to use. Core cutting if the wall has no opening.
- Recurring: Electricity, which you estimate in the calculator, and the cleaning visit the brand charges.
- Optional: A stabiliser, when the voltage window printed for that model does not cover the supply in the house. Coil coating. An extended warranty. Each one is its own yes or no.
- Conditional: Refrigerant if a joint leaks, and a part after the warranty on that part ends. The price is the brand’s spare rate on that day.
Worked example: write the quote down
Measure the pipe run before you order. Then fill this table from the documents in the last column. Leave a cell blank until that document is open.
| Line | What you write | Where the number is |
|---|---|---|
| Machine | The price on the tax invoice | The invoice |
| Copper in the carton | The length on the kit list | That model’s product page or the carton |
| Pipe run | The distance from the indoor unit to the outdoor unit | Your tape |
| Extra copper | Measured metres minus the metres in the kit, then times the card’s rate for one metre. Zero when the run is within the kit. | The brand’s installation card |
| Bracket or stand | The card’s rate | The same card |
| Drain extension | The card’s rate | The same card |
| Plug, cable, or core cutting | Only the lines this job needs | The same card |
| Labour and tax | Each line on the tax invoice | The invoice the technician gives you |
| Day-one total | The machine plus the installation lines you wrote | Your sum |
Day-one cost is the machine, plus labour, plus the tax on the invoice, plus extra copper, plus the bracket, plus the drain, plus any other line on that card. Extra copper is zero when the measured run is within the kit. Otherwise it is the extra metres times the card’s rate for one metre. Many split-AC kits include a short copper pair. The length is on that model’s kit list.
Official standards
Official source. The star label on a room air conditioner is the Bureau of Energy Efficiency label. The AC power consumption calculator reads that label for units and star payback. The installation bill should be a tax invoice with labour, materials, and tax on separate lines. Read the percent on that invoice. Last verified: November 2026. When a brand’s installation card is copied onto this page, name the card and the date it was opened.
Match the technician’s lines to the brand’s published installation card before the work starts.
Quick rule before you pay the technician
- Measure the pipe run before you order. Subtract the copper length on that model’s kit list.
- Ask for the brand’s installation card and an itemised tax invoice before you pay.
- Read the voltage window on that model before you add a stabiliser.
Related calculators and guides: AC power consumption calculator | How PriceIndia checks a cost page | No-cost EMI versus paying cash